Our 2.7m x 5.9m (16m2) Steel Glasshouse / Shed combo framing kit includes wall frames, roof frames, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans. Door frames are not included but can be supplied at extra cost. This product is designed for plastic sheeting (not included).

2.7m W x 5.9m L, Stud height at 1850mm raking up to 1987mm. Studs at 600crs in shed area, and 900crs in glasshouse area, nogs at 1000crs, roof at a 3-degree pitch. Openings, 1770 H x 700 D first door, second door 1770 H x 800 D.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

Call us on 04 887 3496 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any inquiries and provide expert guidance regarding our listings and services.

For more information on building work that does not require consent click HERE.

Our 8 x 3m (24m²) shed steel framing kit includes roof and wall frames, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans).

8m L x 3m W x 2.4m stud height raking to 2.8m. Studs at 600crs, nogs at 800crs. Roof at an 8-degree pitch. 600mm eave to front wall. Suitable up to a high wind zone, adaptable design to cater to higher wind zones as required. This may incur further costs.

Through our in-house design team, we can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

Call us on 0800178 335 for a free comprehensive quote. Our team is ready to assist you with any inquiries and provide expert guidance regarding our listings and services.

For more information on building work that does not require consent click HERE.

Our 6m x 3m (18m2) Garden shed workshop combo steel framing kit includes wall frames, roof frames, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans.) We can also supply Cladding and Roofing at an additional cost.

6m L x 3m W, Stud height at 2.2m raking up to 3.2m. Studs at 600crs, nogs at 1200crs. Openings 2020mm w x 2120mm H larger door, 815mm W x 2120mm H smaller door, 1020mm W x 620mm H window. Gable Roof at a 35-degree pitch. Suitable up to a High (H) Wind Zone and 1kPa Snow Load.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

Call us on 04 887 3496 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any inquiries and provide expert guidance regarding our listings and services.

For more information on building work that does not require consent click HERE.

Our 6 x 3m (18m²) mono-pitch sleep out steel framing kit includes roof and wall frames, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans). We can also supply Cladding and Roofing at an additional cost.

4.8m L x 3m W x 2.4m stud height raking to 2.57 m at ridge. Studs at 600crs, nogs at 1350crs. Roof at a 3-degree pitch. Bracing not included. Suitable up to a High wind zone (H) and <1kPa Snow Load.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

Call us on 04 887 3496 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any inquiries and provide expert guidance regarding our listings and services.

For more information on building work that does not require consent click HERE.

Our 10.8 x 3m (32.4m²) two bedroom mono-pitch sleep out includes two bedrooms, one bathroom and one living area. The kitset includes roof and wall frames, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans). We can also supply Cladding and Roofing at an additional cost.

10.8m L x 3m W x 2.2m stud height raking to 2.72m at ridge. Studs at 600crs, nogs at 1350crs. Roof at a 10.18-degree pitch. Bracing not included.Suitable up to a High wind zone (H) and <1kPa Snow Load.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

Call us on 04 887 3496 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any inquiries and provide expert guidance regarding our listings and services.

Our 18m x 6m (108m²) steel garage framing kit includes wall frames, roof trusses, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans). Designed for High (H) wind zones and 1.5kPa snow load. We can also supply ceiling battens, roof purlin, cladding and roofing at an additional cost

18m L x 6m W x 2.42m stud height raking up to 3m. Roof at a 5.6-degree pitch, 350mm webbed rafters. Note that roof purlin, ceiling battens, brackets etc are not illustrated in the framing model images but are included in the kit supply.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

Call us on 04 887 3496 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any inquiries and provide expert guidance regarding our listings and services.

Our 5.4m x 5.9m (30m2) steel garage framing kit includes wall frames, roof frames, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans.) We can also supply cladding and roofing at an additional cost.

5.4m W x 5.9m L, Stud height at 2.42m raking up to 2.95m. Studs at 600crs, nogs at 1200crs, roof at a 12.124-degree pitch. Suitable up to a High (H) wind zone and <1kPa snow load.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

Call us on 04 887 3496 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any inquiries and provide expert guidance regarding our listings and services.

For more information on building work that does not require consent click HERE.

Our 6m x 9m (54m2) steel sleepout / office combo garage framing kit includes wall frames, roof rafters, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans.) We can also supply Ceiling Battens, Purlin, Cladding and Roofing at an additional cost.

6m W x 9m L, Stud height at 2.42m raking up to 2.72m. Studs at 600crs, nogs at 1350crs, roof at a 3-degree pitch. Suitable up to a High (H) wind zone and <1kPa snow load.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

Call us on 04 887 3496 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any inquiries and provide expert guidance regarding our listings and services.

Our 2.95m x 8m GF level, 9.2m 1F (24m²) tiny home framing kit includes wall frames, mezzanine frames, roof frames, site kit and related ancillaries (assembly screws, driver bits, gloves, construction plans). We can also supply Cladding and Roofing at an additional cost.

9.2m L x 2.95m W x 3.35m stud height raking to 3.5m, studs at 600 crs, nogs at 800 crs, overall height 3.6m, roof at a 3 degree pitch, twin mezzanine each with stepped walkway (steps supplied by others). Designed for trailer mounting.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

We can also supply External Metal Cladding and Roofing* as extra cost options, please notify our team if you would like any of these items added to your estimate.

Call us on 0212783351 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any enquiries and provide expert guidance regarding our listings and services.

*Delivery of Cladding and Roofing is separate to the delivery of our Steel framing and is determined by the manufacturer based on the product weight and location provided for delivery.

Our 8.36m x 9.95m (83.3m2) steel two bedroom house framing kit includes wall frames, webbed rafters, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans.

8.36m W x 9.95m L, Stud height at 2.42m raking up to 3m. Studs at 600crs, nogs at 1200crs, roof at a 4-degree pitch. Suitable up to a High (H) wind zone and <1.5kPa snow load.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the products weight and the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

We can also supply Roof Purlin, Ceiling Battens, External Metal Cladding and Roofing* as extra cost options, please notify our team if you would like any of these items added to your estimate.

Call us on 0212783351 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any enquiries and provide expert guidance regarding our listings and services.

*Delivery of Cladding and Roofing is separate to the delivery of our Steel framing and is determined by the manufacturer based on the product weight and location provided for delivery.

Our 8.3m x 11.9m (101m²) three bedroom house steel framing kitset includes roof rafters, wall frames, site kit and other related ancillaries (assembly screws, driver bits, gloves, construction plans).

8.3m W x 11.9 L x 2.42m stud height raking to 3m. Studs at 600crs, nogs at 1200crs and 1350rs internally. Roof at a 4-degree pitch. Bracings not included. Suitable up to a High wind zone (H) and <1.5kPa Snow Load.

Through our in-house design team, Steeltec can also handle your building consent documentation and amendments of existing plans to suit steel framing if required. With adaptable designs, each of our frames can be accommodated to fit your own steel framing and construction requirements.

Frames are manufactured in our factory in Waimate for collection. They can also be delivered either for free to your nearest Booths Logistics freight depot as a flat bundle pack for you to collect and fully assemble on site, or at an additional freight cost they can be supplied as pre assembled frames, ready to stand with frame to frame fixings provided. Freight costs are determined by the products weight and the location provided for delivery.

Please note pricing covers steel frame kit supply only and is subject to change.

We can also supply Roof Purlin, Ceiling Battens, External Metal Cladding and Roofing* as extra cost options, please notify our team if you would like any of these items added to your estimate.

Call us on 0212783351 or use our estimate form for a free comprehensive estimate. Our team is ready to assist you with any enquiries and provide expert guidance regarding our listings and services.

*Delivery of Cladding and Roofing is separate to the delivery of our Steel framing and is determined by the manufacturer based on the product weight and location provided for delivery.